← All posts

How Much Does a GAF QuickMeasure Report Cost? $18 to $20 per Home (2026)

November 13, 2026 · Software · 6 min read ·

Short answer: a GAF QuickMeasure single-family roof report costs $20, or $18 for GAF Master Elite contractors, and GAF says it arrives in 1 hour or less, according to GAF's QuickMeasure page checked November 13, 2026. Multi-family and commercial reports cost $60 per building ($54 for qualifying GAF certified contractors), and you do not need a GAF certification to order.

GAF QuickMeasure is the aerial roof measurement report sold by GAF, the shingle manufacturer. Below: what it costs by report type, what is in it, how it compares with EagleView, HOVER and Roofr, and when paying per report stops making sense.

How much does GAF QuickMeasure cost per report?

GAF QuickMeasure costs $20 per single-family parcel for most contractors, with a discount for Master Elite and other certified GAF contractors. GAF's published prices on November 13, 2026:

Report typeGAF certified priceAll other prosTurnaround GAF lists
Single-family (per parcel)$18 (Master Elite)$201 hour or less
Multi-family (per building)$54 (Master Elite)$6024 hours or less
Commercial (per building)$54 (PlatinumElite, GoldElite, CoatingsPro+)$60Under 24 hours
Building codes plus hail and wind history add-on$10 per orderWith the report

Source: GAF QuickMeasure residential and commercial pages, checked November 13, 2026. Commercial reports are priced per building, not per square foot, and GAF says you can pin up to 30 buildings at a time with an account, each billed as its own report. GAF also lets you pay for reports with GAF Rewards points, though the page does not state a point value.

What is included in a QuickMeasure report?

A single-family QuickMeasure report includes roof measurements (eaves, valleys and pitch), high-resolution imagery, a bill of materials, past views from multiple angles, an interactive 3D rendering you can edit, and an XML data file. GAF lists PDF, XML and DXF as the file formats. Multi-family reports add a multiple-building summary, and commercial reports add parapet wall measurements and grid line paper for low-slope roofs.

On accuracy, GAF's FAQ says its measurements are "generally about 95% accurate" and that you can request a replacement within 30 days for a report below that. GAF also offers a credit if a report is late and you notify it within 24 hours of the expected delivery time. Those are GAF's own terms, not an independent test.

Do you need to be GAF certified to order QuickMeasure?

No. GAF's FAQ says anyone can order a QuickMeasure report; certification only changes the price. The $2 single-family discount for Master Elite contractors is small per job, so it should not decide your vendor. Coverage is listed as the United States (excluding Alaska) and Canada, with a coverage map on GAF's site.

Is GAF QuickMeasure cheaper than EagleView, HOVER or Roofr?

GAF QuickMeasure is among the cheapest per-report options for a standard single-family roof, roughly tied with EagleView's lowest residential report and Roofr's free plan. Here is a typical residential roof at each vendor's published price:

Vendor and reportPublished price per roofPlan fee20 roofs a monthSource, date checked
GAF QuickMeasure, single-family$20 ($18 Master Elite)None listed$400GAF, Nov 13, 2026
EagleView Bid Perfect, residential$18None on Bronze$360EagleView pricing, Nov 13, 2026
EagleView Premium, medium (40 sq)$60 Bronze, $49 GoldPrepay for Silver and Gold$1,200 on BronzeEagleView pricing, Nov 13, 2026
Roofr roof report, Starter plan$19$0$380Roofr pricing, Nov 13, 2026
HOVER roof only, average roof, Starter$49$0$980HOVER pricing, Nov 13, 2026
RoofMetric Solo (satellite measurement included)$0 per roof$29 a month$29RoofMetric pricing

A few notes on that table. EagleView lists Premium prices by roof size and by prepay tier (Bronze, Silver, Gold), with Platinum marked "call for pricing." HOVER's Pro plan ($999 a year) cuts an average roof to $29, and Roofr's paid plans start at $109 a month with $13 reports. Our EagleView alternatives guide covers the trade-offs in more detail.

When is a per-report service like QuickMeasure worth it?

A per-report service is worth it when you need a document someone else produced: an insurance job where the adjuster expects a third-party report, a multi-building commercial bid, or a roof you cannot trace well from imagery.

The math changes on everyday retail re-roofs. You pay for every bid, including the ones you lose. If you close one in three, each signed job carries about $60 in QuickMeasure fees at 20 bids a month. That is why many small roofing companies measure routine roofs themselves and order a vendor report only when the job calls for one.

RoofMetric includes AI roof detection from satellite imagery on its Solo plan ($29 a month) and Team plan ($49 a month for up to 5 users) with unlimited measurements, and paid plans import EagleView and HOVER PDFs so outside reports land in the same estimate. See RoofMetric pricing and our RoofMetric vs EagleView comparison.

Frequently asked questions

How much does a GAF QuickMeasure report cost?

On GAF's QuickMeasure page, checked November 13, 2026, a single-family roof report costs $20, or $18 for GAF Master Elite contractors. Multi-family and commercial reports cost $60 per building, or $54 for qualifying GAF certified contractors. Local building codes plus up to 10 years of hail and wind history can be added for $10. Confirm current prices on gaf.com before you budget.

Do you have to be a GAF certified contractor to order QuickMeasure?

No. GAF's QuickMeasure FAQ, checked November 13, 2026, says anyone can order a report. Certification only lowers the price: Master Elite contractors pay $18 instead of $20 for a single-family report, and certain certified commercial contractors pay $54 instead of $60 per commercial building. GAF also accepts GAF Rewards points as payment.

How fast is a GAF QuickMeasure report delivered?

GAF lists single-family QuickMeasure reports at 1 hour or less and multi-family and commercial reports at under 24 hours, checked November 13, 2026. If a report is late, GAF says you can notify it within 24 hours of the expected delivery time for a credit toward a report of the same type, except for delays outside its control.

Is GAF QuickMeasure cheaper than EagleView?

It depends on the EagleView product. On November 13, 2026, GAF QuickMeasure was $20 per single-family roof, EagleView listed its Bid Perfect residential report at $18, and EagleView Premium for a medium roof (40 squares) was $60 on the Bronze tier or $49 on Gold. Against Premium, QuickMeasure is far cheaper; against Bid Perfect, the two are about even.

Order QuickMeasure when a job needs it. Measure the rest without a per-report fee.

RoofMetric includes AI satellite roof measurement on its Solo ($29/month) and Team ($49/month) plans with unlimited measurements, plus estimates, e-signature and CRM. Try it free for 14 days with just an email.

Start your free trial →

Sources: GAF QuickMeasure residential page (prices, turnaround, contents, accuracy and ordering FAQ, checked November 13, 2026); GAF QuickMeasure commercial page (checked November 13, 2026); EagleView pricing page (checked November 13, 2026); HOVER pricing page (checked November 13, 2026); Roofr pricing page (checked November 13, 2026); RoofMetric pricing.