What Is the Best EagleView Alternative for a Small Roofing Company?

Short answer: EagleView does not publish a per-report price on its website, so you have to request a quote. Among tools that do publish prices (checked October 30, 2026), GAF QuickMeasure lists $20 per single-family roof, Roofr lists $19 per report on its free Starter plan and $13 on paid plans, HOVER lists $29 to $69 per roof on its Starter plan, and RoofMetric includes satellite measurement in its $29-a-month Solo plan with no per-report fee.

EagleView is the name most roofers know for aerial roof reports, and "EagleView alternative" is one of the most common searches from small roofing companies trying to cut what they spend per bid. This post compares the alternatives that publish their prices, shows what a month of bids costs on each, and covers when you still want a third-party report on the file.

Every price below was checked on the vendor's own website on October 30, 2026. Vendors change pricing often, so confirm before you budget.

Why do small roofers look for an EagleView alternative?

Most small roofers look for an alternative because they pay for a report on every bid, including the bids they lose, and that cost grows faster than the work does. EagleView does not post a price list: its contractor comparison page, checked October 30, 2026, mentions competitive pricing and reports in 1 hour or less, but shows no dollar amounts. Without a published number, the only fair comparison is a written quote for your volume set next to the vendors below.

How much does each EagleView alternative cost?

A single-family roof measurement costs between $13 and $69 from the vendors that publish prices, or nothing extra on a plan that includes measurement. What each vendor listed on October 30, 2026:

These are not identical products. EagleView, GAF QuickMeasure, Roofr and HOVER produce a report for you. RoofMetric gives you a satellite measurement tool with AI roof detection that you or your estimator run yourself, so the cost is a few minutes of your time instead of a fee.

What does a month of measurements cost at 20 bids?

At 20 single-family bids a month, published prices put Roofr and GAF QuickMeasure between about $370 and $400, HOVER between about $660 and $980, and RoofMetric at its flat plan price. The math, using average roofs where price depends on complexity:

• GAF QuickMeasure: 20 × $20 = $400, or $360 for Master Elite contractors.
• Roofr Starter: 20 × $19 = $380. On Measure+, $109 + 20 × $13 = $369, with faster delivery and material calculations.
• HOVER Starter: 20 × $49 = $980. On Pro, $999 ÷ 12 = $83.25, plus 20 × $29 = $663.25.
• RoofMetric Solo: $29, or $49 on Team for up to 5 users, whatever the bid count.
• EagleView: multiply your quoted per-report price by 20 and compare.

If you close one bid in three, every signed job carries the measurement cost of three bids. We walk through that math in more detail in our post on roof measurement software pricing for small roofers.

Do you still need a third-party report for insurance jobs?

Sometimes, yes: when an adjuster or a supplement calls for a vendor report or an Xactimate-ready ESX file, a measurement you traced yourself will not stand in for it. Roofr sells ESX as an add-on ($12 on Starter and $10 on Measure+, or $31 and $23 bundled with the report), and GAF says QuickMeasure includes PDF, XML and DXF files. For retail re-roofs where the homeowner pays, a satellite measurement checked against what you see on the roof is usually enough to price the job.

How do you choose the right EagleView alternative?

Choose by job mix first and price second. A simple way to decide:

1. Count last month's bids and split them into insurance and retail.
2. Price the insurance share at a per-report vendor that delivers the file format your adjusters accept.
3. Price the retail share at a tool that includes measurement, so a lost bid costs you time but no fee.
4. Test accuracy yourself. Measure three roofs you have already installed and compare the squares with your material orders before you switch.

Many small companies end up with a mix: order a report when a file needs one and measure everything else in house. RoofMetric's paid plans import EagleView and HOVER PDFs, so both kinds of measurement land on the same estimate. Our RoofMetric vs EagleView comparison covers the feature differences.

Frequently asked questions

How much does an EagleView report cost?

EagleView does not publish per-report prices on its website. Its contractor comparison page, checked October 30, 2026, mentions competitive pricing and reports in 1 hour or less but lists no amounts. Price depends on the product and your account, so request a written quote for your monthly volume and compare it with the published prices from GAF QuickMeasure, Roofr and HOVER before you commit.

What is the cheapest alternative to EagleView for roof measurements?

Among vendor reports with published prices on October 30, 2026, Roofr lists $13 per report on its paid plans and $19 on its free Starter plan, and GAF QuickMeasure lists $20 per single-family roof ($18 for GAF Master Elite contractors). A subscription tool such as RoofMetric includes satellite measurement in a $29 monthly plan, so the cost per roof falls as your bid count rises.

Is GAF QuickMeasure a good EagleView alternative?

For single-family re-roofs it is a close match on paper. GAF's QuickMeasure page, checked October 30, 2026, lists $20 per single-family parcel for most contractors, delivery in 1 hour or less, and PDF, XML and DXF files with an interactive 3D rendering. Codes and hail or wind history cost $10 extra. Multi-family buildings are $60 each and take up to 24 hours.

Can I measure roofs myself instead of buying reports?

Yes. Satellite measurement tools let you or an estimator trace a roof in a few minutes and price it right away. RoofMetric includes AI roof detection and satellite measurement on its Solo plan ($29 a month, 1 user) and Team plan ($49 a month, up to 5 users) with no per-report fee, and its paid plans import EagleView and HOVER PDFs for jobs where you still order a report.

Sources: EagleView contractor comparison page (no published prices, delivery claim, checked October 30, 2026); GAF QuickMeasure page (prices, delivery and file formats, checked October 30, 2026); Roofr pricing page (plans, report and ESX prices, delivery, checked October 30, 2026); HOVER pricing page (plans, per-project prices and turnaround, checked October 30, 2026); RoofMetric pricing.